Pharmaceutical


Fluid mixing, antibiotic fermentation, raw material delivery, raw material mixing and stiring, driving centrifugal machine, pneumatic control, chalking, fluid delivery, vacuum drying and vaporisation.
Major demands for product:


Fluid mixing, raw material delivery, raw material mixing and stirring, driving centrifugal machine, pneumatic control, chalking, fluid delivery, vacuum drying and vaporisation.
Antibiotic production
Compressed air supplies oxygen for aeration to bacteria during antibiotic production.
Compressed air supplies provide aeration oxygen for oxidation processes to produce pharmaceutical grade products such as lactose.
Compressed air is used to spray coat tablets, packaging and bottling.
Compressed air is widely employed in conveying tablets, blister packaging and bottling.
Compressed air is used to operate pneumatic cylinders, control valves and components employed in automated production lines.

Challenges:

The production of antibiotics and lactose requires sufficient oxygen, and often general machines are not qualified; pharmaceutical manufacturing must be automatic and absolutely hygienic.

Solutions:

1) Air supplied by oil-free compressors, excluding air discharged from uncontrolled environments.
2) In order to avoid condensed water in the pipeline, the air must go through a dehumidification process.

Dry purification device

For oil-free compressors or centrifugal compressors, no oil and very little dust accumulates in the compressed air, and the size of dust particles are microscopic, therefore,so it is unnecessary to equip an additional sophisticated air filter and an oil filter at the discharge pipe. A heatless dryer or a freeze dryer is able to remove 99.19% of moisture in the compressed air, in this way, the compressed air after treatment can meet the air requirement of the pharmaceutical industry.

Machine room requirements for compressors

The compressor requires a separate machine room which must be away from any source of vibration, is dust-free and away from places with corrosive gas, under high temperatures and/or high humility. In addition, the machine room must be well ventilated, with temperatures in the room no more than 40℃. The room also needs to be spacious and bright and be equipped with necessary lifting equipment and soundproof measures.